My home made Media Blast Cabinet
Finally I had it with the small blasting cabinet.
I ordered some bits and pieces from TP Tools and got 2 sheets of plywood.
BUILDING A GOOD SIZE BLASTING CABINET 48 X 24 X 32
Cutting out for the window And the holes for the gloves Caulking all the cracks Building the bottom part Cutting a hole for the light Ready for primer and paint Still had that blue paint, and it goes nice with the lift Assembly of top and bottom part Now get some legs Here we go, it's standing up. I just used some wire shelf pieces inside. Building the top light I had the 100W 12 DC driver sitting a round, and also 2 HID ballasts and bulbs Some flashing left over makes a nice reflector The 2 HID bulbs use only 70 Watt Here a quick test of the light Looks like I have enough light in there Here it is ready for a blast Here it is the top one to be done, bottom one is clean and ready for powder coating. Hope I can fit it in the stove.